64 lines
2.6 KiB
Markdown
64 lines
2.6 KiB
Markdown
# FPGA-Core
|
||
|
||
Custom RISC-V CPU core built from scratch in SystemVerilog. Starts as RV32IM,
|
||
grows to RV32IMA + Sv32 + M/S/U privilege en route to booting Linux.
|
||
|
||
## Target
|
||
|
||
- Board: Digilent Arty A7 100T (xc7a100tcsg324-1)
|
||
- Toolchain: Vivado 2025.2 or later
|
||
- Language: SystemVerilog
|
||
- ISA: end target **RV32IMA + Zicsr + Zifencei + M/S/U privilege + Sv32**
|
||
(Linux-capable). Built incrementally — see `ROADMAP.md`.
|
||
- Clock: 50 MHz (100 MHz xtal ÷ 2 via MMCM)
|
||
|
||
## Architecture
|
||
|
||
"Single-cycle" logical model (no pipeline registers), Harvard architecture
|
||
(separate instruction/data BRAM). The combinational ALU and a multi-cycle M
|
||
unit (DSP-based multiply, iterative divide) sit side by side; the datapath
|
||
stalls on M-unit and BRAM accesses. Inter-stage signals are typed structs in
|
||
`rv32_pkg.sv` — the same structs become pipeline registers when the core is
|
||
pipelined later (Phase 16, optional).
|
||
|
||
## Memory Map
|
||
|
||
| Address Range | Region |
|
||
|---------------------------|----------------------------------------------|
|
||
| `0x0000_0000–0x0FFF_FFFF` | reserved boot aperture (Phase 17: 16 MB SPI flash at low end) |
|
||
| `0x1000_0000–0x1000_0FFF` | MMIO (UART; later: timer, PLIC) |
|
||
| `0x2000_0000–0x2000_FFFF` | instruction BRAM (64 KB) |
|
||
| `0x8000_0000–0x8000_FFFF` | data BRAM (64 KB) → DRAM in Phase 17 |
|
||
|
||
Reset PC = `0x2000_0000`.
|
||
|
||
UART registers (split layout):
|
||
|
||
| Address | Access | Meaning |
|
||
|---------------|--------|----------------------------------------------|
|
||
| `0x1000_0000` | W | TX data — byte to send |
|
||
| `0x1000_0004` | R | RX data — pops one byte from RX FIFO |
|
||
| `0x1000_0008` | R | status — bit0 = `tx_busy`, bit1 = `rx_valid` |
|
||
|
||
## Building
|
||
|
||
Requires:
|
||
- Vivado 2025.2 or later
|
||
- RISC-V GCC toolchain — multilib `riscv64-unknown-elf-gcc`. March string
|
||
evolves with the implementation: `rv32im` (Phase 8) →
|
||
`rv32im_zicsr_zifencei` (Phase 12) → `rv32ima_zicsr_zifencei` (Phase 15).
|
||
- `riscv-tests` (for compliance verification from Phase 8.5)
|
||
- Serial terminal (minicom/picocom/PuTTY) at 115200 8N1
|
||
|
||
Open `FPGA-Core.xpr` in Vivado. Synthesis and implementation target the xc7a100tcsg324-1.
|
||
|
||
## Roadmap
|
||
|
||
See `ROADMAP.md` for the full phased build plan.
|
||
|
||
## References
|
||
|
||
- [RISC-V ISA Spec Vol 1 (Unprivileged)](https://riscv.org/technical/specifications/)
|
||
- [RISC-V ISA Spec Vol 2 (Privileged)](https://riscv.org/technical/specifications/)
|
||
- [Arty A7 Reference Manual](https://digilent.com/reference/programmable-logic/arty-a7/reference-manual)
|